Holders-for-the-Touch-Sensor-Modules

There are two variants of the holders for our Touch Sensor Modules (TSM) available, for 0 and 90 degrees. These have different dimensions so that they can be used in different conditions (see Table 1). For STEP and STL files of the holders, please refer to Downloads, Holders for Touch Sensor Modules.

Holders for 0 degrees TSM:s

The pictures below illustrate the holders for 0 degrees Touch Sensor Modules.     

Picture 1. 0 degrees TSM placement on the screen surface. Suitable for holders with part number: 002310, 002311, 002312, 002313 and 002390.

Picture 2. 0 degrees TSM placement on the edge the display. Suitable for holders with part number:  002314, 002316, 002317, 002319 and 002389.    

Holders for 90 degrees TSM:s

The pictures below illustrate the holders for 90 degrees Touch Sensor Modules.

Picture 3. 90 degrees TSM placement on the screen surface. Suitable for holders with part number: 002314, 002316, 002317, 002319 and 002389.

Picture 4. 90 degrees TSM placement on the edge of the display. Suitable for holders with part number: 002348, 002350, 002351, 002352 and 002391.

   

 

 

 

Dimensions of the Touch Sensor Module holders

Part number	A (mm)	Suitable for / Mount on	See figure
002311	10	0° screen surface	1
002312	20	0° screen surface	1
002310	30	0° screen surface	1
002313	40	0° screen surface	1
002390	50	0° screen surface	1
002352	10	90° screen edge	4
002348	20	90° screen edge	4
002350	30	90° screen edge	4
002351	40	90° screen edge	4
002391	50	90° screen edge	4
002316	10	0° screen edge & 90°screen surface	2 resp. 3
002314	20	0° screen edge & 90°screen surface	2 resp. 3
002317	30	0° screen edge & 90°screen surface	2 resp. 3
002319	40	0° screen edge & 90°screen surface	2 resp. 3
002389	50	0° screen edge & 90°screen surface	2 resp. 3

Please see the dimensions of the holders in the table below (Table 1).

Table 1. Dimensions of the holders for Touch Sensor Modules

 

For STEP and STL files please refer to Downloads, Holders for Touch Sensor Modules.