Touch Performance Specification

Touch accuracy

The specified values are valid for the used test setup. For more information, refer to Performance Test Methods. The touch accuracy is measured inside the TAA, using a silicone based cylindrical test rod with a diameter of 16 mm. 

Touch Accuracy for Normal Range Sensor Modules of the 90° and 0° Types 

Typical Value: The accuracy on average, within the TAA. 
μ ± 2σ: 95% of reported touch positions deviate less than this value. (2σ standard deviation).
Product number: "X" indicates if the sensor module is of type 0º ("0") or 90º ("1").

The accuracy specification (normal range, 0° and 90°) is valid for units produced from 15th January 2020. Please contact our support team for specification regarding earlier produced sensor modules, or general questions about the accuracy specification. 

Touch Accuracy for Extended Range Sensor Modules of the 90° and 0° Types

Typical Value: The accuracy on average, within the TAA. 
μ ± 2σ: 95% of reported touch positions deviate less than this value. (2σ standard deviation).
Product number: "X" indicates if the sensor module is of type 0º ("0") or 90º ("1").
[1] Preliminary value.

The accuracy specification (extended range, 0° and 90°) is valid for units produced from 15th January 2020. Please contact our support team for specification regarding earlier produced sensor modules, or general questions about the accuracy specification.  

Technical Specification